Chapter 41 40 We, the Workers, Have Power——Record of Li Bin, the Second National Moral Model

He is a member of the labor force and has spent 30 years on the production line where metal shavings splatter.Some people said that he should have left the production line long ago, and went to be a factory leader, or a company leader, or even a city leader, or go abroad as an expert.why?Because, since 1992, he has won many dazzling honors in his post: Shanghai Model Worker, Model Worker of the Ministry of Machinery Industry, Shanghai's first Top Ten Worker Inventors, Shanghai "Three Schools" Champion, Shanghai Excellent Party Member of the Municipality, National May 1st Labor Medal, National Outstanding Youth Post Expert, National Top Ten Outstanding Workers, National Machinery Industry Worker Model, China Youth May 4th Medal, China Skills Award, National Technical Expert, National Labor Model, National Machinery Industry Employee A pacesetter in technological improvement and innovation, a pacesetter in national knowledge-based workers, a national top ten high-skilled talent model, a master of Chinese machinery industry skills, the second national "model of dedication and dedication", and one of the 60 "time leaders"——

The most influential labor model since the founding of New China, the first prize of China Machinery Industry Science and Technology... Also, representatives of the 7th, 8th, and 9th Shanghai Party Congress, representatives of the 11th and 12th Shanghai People's Congress, Representative of the 16th and 17th National Congress of the Communist Party of China, representative of the 11th National People's Congress... It can be said that in terms of skills and politics, almost all the honors an industrial worker possesses are included.Such a dazzling aura hangs over his head, his reputation has spread throughout the industry, and he can be taken to another position.However, he didn't go anywhere, and has been sticking to the front-line production position.Everyone who knew him said he never changed.

He is Li Bin, a worker at the Shanghai Hydraulic Pump Factory and an expert in numerical control. It was discovered that Li Bin seemed to have changed since 1986. That year, Shanghai Hydraulic Pump Factory sent more than 30 workers to the Swiss branch of German Rexroth for technical training.The hydraulic pump factory is located in the southwest corner of Shanghai. It is a major domestic hydraulic pump manufacturer. It has created brilliance: the hydraulic system of the "29" anti-aircraft gun in the 1960s, and the hydraulic system components of the "701" communication satellite launch vehicle in the mid-1970s. , the curved motor of the tank emergency vehicle in the 1980s, and the later third-generation tank steering hydraulic system device, etc., all came from this factory.As an old state-owned enterprise, it has performed the entire mode of traditional metal cutting processing for decades-on the old-fashioned machine tool with a layer of paint peeled off and then repainted, one piece per person.By the end of the 1980s and the beginning of the 1990s, many old state-owned enterprises were lonely, and they were looking for new ways to get out of the crisis and revive the state-owned enterprises.At that time, some people said that Shanghai Hydraulic Pump Factory sent a group of workers abroad as laborers for technical training at this time, in order to make the lonely enterprise nirvana.

Li Bin's name is also on the list of going abroad for training.When starting out, other people carried a lot of cigarettes and food in their luggage. His luggage was heavier than everyone else's, but it contained four thick foreign language dictionaries and audio tapes. When he visited a foreign company, Li Bin couldn't help being dumbfounded. Their numerical control technology is much more advanced than ours, and we are behind by how many years.With a solid eye, he was greatly stimulated. He felt sad for the backward technology of his huge Chinese company and was extremely anxious, but he was unwilling!His strong sense of self-esteem and responsibility inspired him to study foreign advanced technology.

Foreign companies strictly divide the four key technical elements of CNC machine tools for processing various parts-process, programming, electrical, and tools, into four departments. Four engineers control the CNC machine tools, and then teach people like Li Bin and others Labor workers from third world countries go to work.Li Bin had a certain level of technical skills and foreign language skills when he was in China. After intensive study during this period, he also mastered a lot of languages, so he soon learned some advanced CNC machine tool operation techniques.But he did not show his face, and still followed the foreign technicians silently every day, staring at every debugging step with his eyes, and desperately remembering every program input.The Geneva River in summer is very charming. At night, his colleagues went shopping, but he was lying on his desk, recalling every procedure he saw during the day, and carefully recorded it.Slowly, the four key technologies of CNC machine tools for processing various parts became clear in his mind.

One day, the technicians of the foreign company were on vacation.On this day, a batch of complex parts came to be processed suddenly, and the person in charge of the foreign party was in a hurry.Just when everyone was helpless, they heard a soft voice: "Let me try." It was Li Bin who said this.The person in charge of the foreign party widened his eyes and looked at Li Bin suspiciously.Li Bin didn't say much, picked up the drawings, and then wrote the programming, formulated the process, prepared the tool, entered the program to start the machine, and the four major technical elements were completed in one go.The person in charge of the foreign party was stunned and waved his arms with admiration and joy on his face.

The matter quickly spread and spread back to the factory.The factory leaders and workers are all proud of Li Bin.Yes, at the end of the one-year study and training, Li Bin carefully recorded and sorted out four thick volumes of CNC machine tool debugging, operation and programming materials.At the same time, he also became the first Chinese worker debugger, and began to guide foreigners to operate the machine. In 1988, a Swiss company in Germany named Li Bin for labor training.In fact, this is no training, but let him go to work.Li Bin still went, he wanted to learn more advanced foreign technology.Before returning to China this time, the foreigner promised him generous treatment and begged Li Bin to stay.This is undoubtedly a huge temptation for any young man who is only 28 years old.However, Li Bin went home with foreign technical materials and first-hand programming skills.

Later, someone asked puzzledly: "Li Bin, are you stupid?" I should come back." The Germans admired Li Bin so much, and in the next few years, they ordered Li Bin several times, and even gave the company a CNC machine tool worth 400,000 yuan for free in exchange for Li Bin to go to their company for "training" for one year. How proud this is of Chinese workers!That day, when someone told Li Bin the news, Li Bin was leaning over on the rotating machine tool without raising his head... As the saying goes, a tall building rises from the ground, and the foundation is built on the basis of bricks and tiles.

In 1980, after graduating from the technical school of Shanghai Hydraulic Pump Factory, Li Bin entered the factory and was assigned to work as a milling machine and a grinding machine.At that time, the factory equipment was outdated and the scrap rate was high; the market was shrinking, and the company was losing money year after year; coupled with the factory relocation, the company was facing fierce shocks.Li Bin is studying lathes. He usually keeps quiet and says little. He thinks: Only when workers are strong can enterprises be revitalized;He thought so, and he did so.Under the guidance of his master, he studied hard and practiced hard. First, he spent more than a year to initially master the metal cutting processing technologies such as turning, pliers, and milling, and then gradually mastered the technologies of machinery, tooling, and maintenance.At the same time, he was always seen reading books in his spare time, teaching himself high school courses.

In 1982, there was one more student in Shanghai TV University, and that was Li Bin.Yes, his hard work and studious also attracted the attention of the factory leaders, who deliberately trained him, recommended and encouraged him to study at TV University.Some people worry that Li Bin's foundation is poor, can he keep up?As a result, when he graduated from TV University, he scored 80 points or more in 35 of the 36 courses, and scored 85 points in the national English test.He was also rated as "Three Good Students", and he was one of only two students who received "Excellent" in their graduation thesis.Yes, because Li Bin knew that his foundation was poor, he never gave up any learning opportunities.At that time, he also used his spare time to go to Shanghai Jiaotong University and Changning District Science and Technology Station for advanced studies.

It is precisely because of the spirit of studious and assiduous study that Li Bin has mastered the four essentials of using CNC machine tools, and has climbed the peak again and again in terms of skills. In 1989, Shanghai Hydraulic Pump Factory began to purchase CNC machine tools from abroad.The secrecy of high and new technologies is the "secret weapon" in international competition. It is not surprising that only one or two processing programs are set for imported domestic CNC machine tools, which also makes "foreign machines" appear extraordinarily mysterious.That day, Li Bin turned and turned around a machine tool, looked and looked, touched and touched, and finally couldn't bear it anymore. He operated on this "foreign machine"—in a short period of time , Only 2CNC CNC machine tool processing range expanded to 12 varieties, 24 kinds of parts.Then he reformed the ring groove cutting knife that was originally 6 types of design plunger, so that the one-time forming cutting knife had to be changed from the original 60 parts to 700 parts at a time, and the efficiency was increased by a full 10 times. Another time, the TNS.42 CNC machine tool purchased by the factory for more than 1 million yuan was originally designed to process bar parts, while the parts of the hydraulic pump factory include rod shapes, disc shapes and irregular geometric shapes.The factory has little funds, and it is impossible to configure a dedicated CNC machine tool for each part extravagantly.In those days, Li Bin was called "dumb" all day long. From the workshop to the home, from the table to the floor, the blueprints were spread out. From day to night, how many calculations, how many experiments, how many times did he come suddenly in the middle of the night? When I got "inspiration", I got up to record, and regarded the machine tool as my "baby lump".In the end, a set of new procedures that "foreign machine" itself did not have was born in China, in Shanghai, and in the hydraulic pump factory.Some people say that Li Bin "made foreign machines with Chinese characteristics", and the "almighty" Li Bin turned his "baby bump" - CNC machine tools into "all-round" machine tools. People still clearly remember such an incident: In July 1996, the hydraulic pump factory finally raised a sum of money to buy a CNC machine tool.When purchasing equipment, the factory manager invited Li Bin to participate in the negotiation.Yes, the factory manager trusts Li Bin.Li Bin is also well aware of its weight. For a hydraulic pump factory that is in a difficult period, more than 1 million yuan is not a small figure, and all the employees of the factory can't afford this money after working hard for several years.At the beginning of the negotiation, the foreign party also priced the solidified program of the CNC machine tool itself, and the opening price was more than 1.2 million yuan.At this time, Li Bin, who usually blushes when speaking with unfamiliar people, couldn't help it anymore. He told the other party calmly: "As usual, the inherent programs of the machine tool should not be negotiated. I have the ability to open these programs." He didn't pay attention to the simple and honest Li Bin, but at this time he looked at the confident Li Bin and couldn't help being surprised, knowing his weight.After a while of bargaining, the foreign party had to give in and agreed to sign a special preferential contract of 1 million yuan with the hydraulic pump factory.From then on, the foreign party also knew that the hydraulic pump factory had a powerful role. At this time, Li Bin became more and more famous. He first became an engineer, and then passed the evaluation of senior technicians. Even so, the hydraulic pump factory is still not a place with attractive benefits. At one time, the company was still facing the dilemma of losing money, and some well-connected workers left one after another.Li Bin's monthly income was less than 1,000 yuan. At that time, not to mention large foreign companies, even domestic companies sought him out again and again, hoping that he would work for them with a high salary.However, Li Bin was nailed to the hydraulic pump factory like a screw, and he didn't go anywhere. He said: "You also want to change jobs, and I want to change jobs too, so who will revitalize the enterprise?" In 1998, a piece of news spread like wildfire in the factory: "Li Bin was admitted by Shanghai Second Polytechnic University." Some people said that now Li Bin is leaving the hydraulic pump factory, isn't he?He is already operating a CNC machine tool and is a model worker, so why should he go to the Second Industrial University?Li Bin didn't say a word after hearing this. Only he and those who knew him knew why he went to the Second Industrial University. Of course it is to continue to "charge".That year, he attended the Municipal Party Congress and the National People's Congress successively, and led a series of speeches on improving the quality of the whole people. There are workers with practical experience and theoretical knowledge, but their own knowledge is far from enough.At this time, Shanghai Second Polytechnic University, listed as an "A-level" college for adult education, recruited students. The school's mechanical and electronic engineering major relied on machinery and added a lot of electrical and electronic knowledge. After 13 years in school, he returned to the classroom as a student. Li Bin went to study, but he was often seen in the factory.That is, in order not to affect his work, he chose to study in his spare time two nights a week and one rest day, and went to work an hour earlier.But work often affects his studies.The company was very busy producing state-specific equipment, and he really couldn't leave, but as long as he could catch up with a class, no matter it was windy or rainy, he would drive a moped from the company in the southwest corner of Shanghai to the school in the northwest corner.Sometimes it is unavoidable to always be late, and the school leaders and teachers inevitably have ideas at the beginning, but they are all moved when they know the truth.In order to make up for the missed lessons, Li Bin often borrows notes from his classmates, and makes up the lessons by himself after returning home. When encountering problems that he doesn't understand, he asks his classmates and teachers for advice until he understands the problem thoroughly.The school leaders and teachers saw that he was busy with work and had many social activities, and wanted to reduce his burden, but he just "didn't appreciate it" and had a lot of notes, homework, tests and exams. In December 1998, he went to Beijing to participate in the "China Skills Awards Conference" with books and notes in his luggage. Learning so eagerly, when he graduated in 2001, it is not surprising that people saw his transcript: 90 points in advanced mathematics, 98 points in integral transformation, 98 points in mechanical design, 92 points in theoretical mechanics, and 86 points in basic computer applications , graduation project "excellent"... Learning English may be the most troublesome thing for many skilled workers, and it is actually the same for Li Bin.When he was still studying at TV University, English as a main subject lay in front of him like a "big mountain". It was not easy to master 4,000 words.But he figured out three ways to "lift the weight with ease": one is "time tailoring", he has to reverse two buses from home to school, and the one-way journey sometimes lasts more than two hours, and he silently Recite words; the second is "promotion and application", he went to the bookstore to buy English books, and used a dictionary to study carefully when he went home; the third was "encirclement, suppression, gathering and annihilation", he had to summarize every other stage, for which he often studied late into the night ...As a result, he scored more than 85 points in the national unified English test every time, and his "weakness" became a "strength". Some people say that Li Bin likes to be "new" in learning, and he collected professional books such as "Numerical Control Technology Manual", "Technology and Maintenance of Machining Center", "Numerical Control Programming" and so on as soon as they were published, and he collected them and studied them carefully.At the same time, he also reads "old" in his studies. The materials and books brought back from Switzerland have always been regarded as treasures by him. Whenever there are technical difficulties, he will take them out for detailed analysis and comparison... He compared his study to "a small boat wandering in the sea of ​​learning".Some people say that he is not "a flat boat in the sea of ​​learning", he is like a "boat" with an engine installed! Yes, the foundation of Li Bin's professional knowledge is becoming more and more solid, and the application of professional knowledge has been introduced again and again, and he has developed a superb ability to control high-tech, and has more "capital" to realize the value of life.In his words: "My wish is very simple, that is, to be a good worker." What a simple sentence, but so powerful. With the continuous development of enterprises, hydraulic pump factories have generally used CNC machine tools.Once, a machining center in the factory experienced X-axis positioning dimension “drift” many times. This is a big taboo for CNC machine tools. If it is light, it will damage the tool.The factory invited a foreigner who was in charge of technology and maintenance to help with maintenance.It took the foreigner more than half a day to replace the magnetic grating on the X-axis, and the repair cost was more than 10,000 yuan.However, the machine tool had been in operation for less than two days, and the old problem reappeared.This made the factory leaders very anxious, did they still invite foreigners?Li Bin said: "Let me try it." After careful observation, he found that the magnetic grating was afraid of contamination, so he wiped the scrapped magnetic grating removed by the foreigner and reinstalled it, and added an iron baffle as the magnetic grating. The protection device, this improvement, solves the error problem that has always plagued the machining center.Someone excitedly said: Li Bin's technical level is higher than that of foreigners.Li Bin said: "We must learn from foreigners with an open mind, but we must not be superstitious." Solving the factory director's urgent matter more than once.Another time, the factory received a batch of orders for national special hydraulic products with world advanced level.Due to the tight schedule, high technical requirements, and high processing difficulty, and the CNC machine tools in the factory are not systematic, it is planned to entrust the product shell to an outside unit for processing, but the delivery date and quality cannot be guaranteed.The factory manager was very anxious.After Li Bin heard the news, he took the initiative to take over this "hard bone".After careful study and repeated pondering, he found that the machining accuracy of each part on the product shell is limited to 2 to 3 wires, which is very demanding.what to do?He repeatedly calculated, took out the processing route, compiled the program, made the corresponding tool holder, and configured the appropriate tool.After the start of the trial production, he did not go home for three or four consecutive days, "nailing" the trial production site, and finally produced a qualified product shell, which was passed at the appraisal meeting. Furthermore, in the hydraulic pump factory, the processing quality of the ring socket of the inclined shaft pump has long been the bottleneck of product parts processing. In order to change this situation, the factory decided to invest nearly 700,000 yuan to order a special machine for ring socket processing.The letter of intent for the order contract between the two parties has been signed, but because the delivery cycle of the other party is too long, the distant water cannot save the nearby fire, so the formal contract cannot be signed for a while.At this time, the factory leader thought of a second-hand equipment ring nest milling machine imported from Germany in the 1980s lying in the warehouse. Due to the serious failure of the equipment, it failed to debug many times, so it could only sleep in the warehouse. several years.Is it possible to fix it?The factory leader approached Li Bin to discuss.Upon hearing this, Li Bin said excitedly: "I've been thinking about this for the past two days, so leave this task to me." With Li Bin's promise and invitation to fight, the factory gave up the original "buy machine" plan, The "machine repair" plan was implemented, and a special repair team headed by Li Bin was formed, with sufficient manpower and material resources deployed and directed by Li Bin.Li Bin led the team to devote himself to it. From fault diagnosis to repair, from tool design and processing to debugging, he did everything by himself, checked data, programmed, pondered and studied repeatedly, and revised and debugged many times.After three months of fighting day and night, the "dead machine" was finally revived... Don't say that Li Bin surprises and moves the factory time and time again, even the foreigners are excited about Li Bin again and again.At that time, when the construction project of the Pudong Hydraulic Base entered the final sprint stage, at the critical point of equipment debugging, a drill bit of imported key equipment was worn out. If it was imported, it would cost 300 US dollars.Time was running out, and the precision of drill bits was very high. In order to relieve the urgent need, Li Bin rushed from Pudong to Puxi, and from the intelligence office to the cutting tool factory without saying a word.The factory is only about ten minutes away from Li Bin's home, but he "passes through the house and does not enter", discussing with the master of the cutting tool factory how to make the drill as soon as possible.It was already one or two o'clock in the morning when he arrived in Pudong and finished installing and debugging the drill bit... All of this did not miss the eyes of a single person, who had been observing carefully for several days standing on the commanding heights of the super-large factory building.On this day, he couldn't hold back anymore, and said excitedly: "The ones in the blue clothes are great! As long as they are willing to stay, I will!" It was Mr. Glaski, the president of the American Sauer Company, who said this.Blue is the logo color of Shanghai Hydraulic Pump Factory, and "blue collar" is the synonym for production workers.Isn't the general manager of a foreign company's admiration for Li Bin and the others a recognition of the value of their work, and a recognition of the important role of workers who have mastered advanced technology in economic development? Yes, everyone knows that if you have a problem, you can find Li Bin.This has become a habit in Shanghai Hydraulic Pump Factory. Let's listen to the conversation between Li Bin and the two drivers during the two nights. At the Municipal People's Congress that time, Li Bin was honorably recommended as a member of the presidium of the conference.In order to ensure the meeting, the conference affairs group provided special cars for the members of the bureau.After the meeting on the first day, the driver was going to take Li Bin home, but Li Bin asked the driver to take him back to the factory. On the way, the driver asked Li Bin: "Why do you have to go to the factory?" "The factory happens to have a batch of parts to be processed in the past few days, so I don't worry about it. I had a meeting all day today, and I want to work overtime at night." "You are neither the boss nor the secretary, so why worry about things in the factory?" "The parts have to come out, the CNC equipment has to be opened, go back and have a look, and feel at ease." The driver was moved. When the car arrived at the gate of the factory, Li Bin shook hands with him to say goodbye. The driver said that he would take Li Bin home after he finished his work.Li Bin refused to let it go.The driver's car waited at the gate of the factory for a long time before leaving. Another time, after being ill, Li Bin worked overtime until three o'clock in the morning and hailed a taxi to go home. "Friend, did you win or lose playing mahjong today?" The taxi driver who had seen many "night returners" was very confident in his eyesight. "Playing mahjong, I work overtime in my unit." "Working overtime so late, most of the night has passed, I told the boss to be a little 'point'." "Blind and confused, Allah is a state-owned enterprise." "Are you kidding? State-owned enterprises are working overtime so late? Is your company going to fly?" "Yes, it's just a matter of time." "Are you that confident?" Li Bin stopped talking and dozed off in the taxi. The taxi driver seemed to sense something, and fell silent, and drove towards Li Bin's house "lightly"... What a real Li Bin, and what a touching Li Bin!This is how Li Bin works day and night on the front line of production.In his opinion, for skilled workers to contribute to scientific development, they must first base themselves on their own posts, improve their technical level, and master advanced, core, and key technologies.Didn't the Party Central Committee propose to build a learning society?On the platform that the company has built for young people to become talents for many years, he has worked hard to learn by himself, persistently studied advanced technology, and kept track of the development of manufacturing technology in developed countries in the world. He has mastered the programming, debugging, maintenance of CNC machine tools, etc. Technology, completed more than 230 technological breakthroughs in just over ten years, completed more than 1,600 product process programming, and improved work efficiency by more than 30 times; developed 57 new products, creating economic benefits for the enterprise of more than 23 million yuan.It also expanded the range of processing on CNC machine tools, maximized the functions of these devices, and directly saved more than 500,000 U.S. dollars in foreign exchange and more than 6 million yuan in RMB for the enterprise.Saved more than 4 million yuan for the enterprise in the innovation of cutting tools, and obtained patent certificates for many projects... This is Li Bin, a worker working hard on the CNC machine tools in the front-line production posts. However, Li Bin is not and will not be a lonely runner. It was discovered that in the list of Shanghai Electric (Group) Corporation's advanced producers, new Long March assaulters and other honorable titles, there are often workers called "Little Li Bin" or "Li Bin-style workers". What's going on here?In fact, such a situation is not difficult to understand.As mentioned earlier, with the introduction and improvement of enterprise products and production technology, continuous improvement of skills is the key for production workers engaged in this field of work.However, it is difficult to adapt to such rapid changes by only relying on the traditional way of masters leading apprentices. It is necessary to systematically study and train workers so that each worker's skills can adapt to the needs of the job.Li Bin has always wanted to set up a training class, teach in person, compile teaching materials by himself, and drive colleagues around him to learn knowledge and technology.Some people were puzzled and said: "You have already achieved such great achievements and won so many honors, is it annoying to hold training courses?" Li Bin said: "My value is not only in how much I have achieved, It also lies in helping more people become talented.” Yes, he does not want to be a lonely runner, but a technology leader, leading a group of workers to run together on the road of knowledge and technology. This is exactly what the factory leaders wanted.The factory leaders are also considering that Li Bin is a famous labor model and an outstanding representative of the working class in the country. Li Bin is not only a name, but also a famous brand and a resource. The company should make good use of this brand and resources to promote Li Bin. Spirit, bring out a large number of production workers like Li Bin, and create greater benefits. Therefore, in 1996, Shanghai Hydraulic Pump Factory established a team named after Li Bin, which integrates the application of modern high-tech processing technology, numerical control programming and automatic operation: Li Bin team.Li Bin taught every member hand in hand, and even compiled teaching materials for everyone.At the same time, the factory leaders carried out a number of activities to further promote Li Bin's spirit, established a work and study activity room for Li Bin's group, set up an honor wall and a display cabinet for tackling key problems, set up a team garden, and also set up platforms such as technical training and skill competitions... …All this has greatly stimulated the enthusiasm of the workers to learn and study technology. To people's surprise, in those few years, the staff of Shanghai Hydraulic Pump Factory decreased, but the annual sales volume increased by more than 10%.The factory leader said excitedly that this depends on the high-quality workforce represented by Li Bin who has mastered modern technology and skills.In particular, the numerical control team led by Li Bin has completed a number of new product developments and equipment improvements and repairs, saving more than 9 million yuan in funds. There are also technological innovation research, production of fixtures, knives, etc., saving millions of yuan in funds. Enterprises have created considerable economic benefits.During this period, a group of "Little Li Bin" or "Li Bin-style workers" emerged. You see, the young female worker Qian Guoping became a technical expert, a senior technician, and became a "March 8 Red Banner Bearer"; The Shanghai Model Worker... Li Bin's team has also won honorary titles such as the Shanghai Red Flag Team, the National Advanced Team, the Shanghai Model Worker Collective, the Shanghai Communist Youth League, and the National "May 1st" Labor Award. Someone couldn't help but marvel: "How did you come up with Li Bin!" It was the leaders of the two brother companies who said this.Everyone in the industry knows that among the three leading hydraulic pump factories in China, Shanghai Hydraulic Pump Factory is the last in terms of scale and the number of CNC machine tools owned. The fixed assets of the other two companies are 10 times that of Shanghai Hydraulic Pump Factory. The other is 2 times higher, but Li Bin and his team from Shanghai Hydraulic Pump Factory have produced national-specific hydraulic products with world-advanced levels. How can this not make them sigh? Later, the Shanghai Electric Industry also established the "Shanghai Electric Li Bin Technician College" named after Li Bin. He has trained more than 10,000 students and has been fully affirmed by the leaders of the ACFTU.The electrical industry also established the "Li Bin Cup Skills Competition" and so on.It can be said that the entire Shanghai electric industry is striving to be a "Li Bin-style employee" and create a "Li Bin-style team"... A single flower is not spring, and the garden is full of spring! "With one Li Bin, our factory can start; with 10 Li Bins, the enterprise can be revitalized!" said the director of Shanghai Hydraulic Pump Factory.Yes, facing Li Bin and Li Bin's team, he couldn't restrain his excitement and pride! Today Li Bin is still working in the production line of Shanghai Hydraulic Pump Factory.It has been 30 years. In the span of 30 years, can't you see in his simple and honest body the demeanor of the contemporary working class's constant pursuit of knowledge and skills? In the past 30 years, with the care and support of leaders at all levels, Li Bin and his colleagues have made great changes in the company, but his daily life has not experienced much ups and downs. He still does this every day and studies like this every day.Some people may not believe it, but in the past 30 years, he has never quarreled with anyone in the factory, let alone an enemy.He works in peace and order every day, and his wife lives peacefully.If something goes wrong, he never blames, blames others, or puts the responsibility on others, but thinks about his own mistakes and mistakes; if he does well, he never takes credit for it, because this is what he should do of.Even when he disagrees with others, especially with foreigners, he does not argue, but shows you the truth to convince you.It is said that he has a good attitude. The company wants to increase wages. He never cares about how much others increase and how much he increases.He never cared about how much he was given.Maybe, because of such a mentality, he only knows to work and live, and has no other worries.After he received many honors for his outstanding work achievements, he was still the same as before, treating people kindly, working diligently, and living a peaceful life.When someone praised him, he also said flatly: "What's so special about this? As long as you love the company and work hard, you will make achievements." Yes, when a person's work is always jumping around like a grasshopper, how can he work hard, concentrate on doing things, and make achievements? Li Bin said: "To do a good job, you must first be a good person. The place where we work is also a place to be a person. We established the 'Li Bin team' to turn the workplace into a place to train people. To cultivate people who are dedicated and skilled Workers. We often say that we love our jobs and are dedicated to our work. In fact, it is not easy to truly do it. There are so many temptations outside, and the work in our company is very tiring and hard. If you are not moved by the temptations outside, you can stand it Is it easy to like and be responsible for all the tiring and suffering? The process of working alone is actually the process of being a human being. The value of a person is reflected from a young age..." People understand Li Bin, he has always liked his position and work so much.Because you like it, you will be willing; because you are willing, you will not feel tired and bitter, and you will be happy even if you are tired and bitter.If you don't like it and you are forced to do it, how can the effect be the same? In fact, apart from loving his position and work, Li Bin is also a caring person.If he is determined, he will have a sense of responsibility, can find problems in the work at any time, and will consciously study, delve into, and find solutions to problems. "Let me try it", this ordinary sentence often hangs in Li Bin's mouth, which embodies his enthusiasm for work and sense of responsibility for the enterprise!As long as you have the heart, you will make achievements in every position. Isn't it said that "the best in every job"? People, just a lifetime of decades.Someone said to Li Bin: "Aren't you stupid to do this every day? You have so many good opportunities, if we run away before it's too late!" However, Li Bin was willing to be so "stupid" and not go anywhere, like a screw " Nail" in the first production line of Shanghai Hydraulic Pump Factory.One nail is 30 years.Some people were very emotional: Li Bin really endured loneliness!Yes, where there is a will, there is a way.Aspirants are lonely. Enterprises sometimes encounter parts with high requirements that they are unable to make, or are worried about not being able to do well, and they are sent outside to do it.Li Bin, who became a model worker, would propose to do it himself at this time.Some people said: Li Bin, you are a model worker, please be more peaceful, do it for others, it is not your responsibility if you do not do well, it is your responsibility if you do not succeed.But he still said: "Although I'm not 100% sure in my heart, let me try." Yes, he doesn't want to be a model worker, he is reluctant to pay tens of thousands of processing fees, and others may not Well done!At this moment, the leader of the factory said: "Li Bin, try it. If you fail, I won't blame you!" What a leader!Li Bin became more courageous to "try". This is how Li Bin is on the production line. With the support of the factory leaders, he has accumulated considerable experience in the practice of "trying" technical problems time and time again, and with the support of theory, he has achieved what he is today. Yes, he joined the Communist Party of China in December 1991.In fact, when he was in high school, he often participated in the study group of the party constitution, so he made a report on joining the party, and later transferred the report to the factory as he was assigned after graduation; when he was in TV University, he made a report on joining the party; I made a report on joining the party.Yes, he is eager to become a glorious Communist Party member, because he believes in the party and is willing to fight for the cause of the party for the rest of his life!I also look forward to growing myself better in the arms of the party.From the day he entered the party report, he has always used the standards of party members to strictly demand himself.Maybe, because of this, whenever he has a job problem, he will face it consciously and bravely, and it doesn't matter if he suffers a loss or is wronged.All this, he has formed a habit. Now that Li Bin has won so many honors, in the enterprise, in the industry, among relatives and friends, in many places, who does not know his reputation and story!How many people are proud of him, how many people are proud of him! However, there is something close to him that he doesn't know, and that is his son's school.儿子正读高三，学校的老师和同学都不知道他们有个同学的父亲是个响响当当的、受到过胡锦涛总书记接见的人物。因为，这同学压根没说，他觉得没必要说，不值得显摆，很正常呀。Like father, like son! 在前不久上海电视台等单位联合举办的上海十大新好男人评选中，李斌赫列其中。是的，李斌有一个幸福的家庭。邻居们经常看到李斌在买菜、烧饭。没错，李斌虽然这些年又增加了许多社会兼职和活动，如：兼有中国液压气功密封件工业协会专家委员会委员，中国设备管理协会高级专家，上海师范大学兼职教授，上海第二工业大学光机电技术研究所副所长，上海技术协会会长等，但是买、洗、烧，这些家务活都是他做的。每天早晨起来，去菜市场买来菜，择好洗好就浸在那里，晚上回家一炒就可吃；有时很忙，他就在骑车下班路上经过菜市场买点儿菜带回家，烧好了再回到厂里。要说烦恼，也许是怎么翻花样，让妻子和儿子吃得满意，会伤一些脑筋。这也许是他给这个带给他温暖和支持的家尽的一份责任了。 妻子善良、贤惠，是电机学院的老师。对丈夫的成绩和荣誉也从不显摆和炫耀。每当厂里来了人，或者来了公司和市里的领导，她总会主动避开，为了不影响丈夫他们的谈话。有时半夜里，或者双休日，厂里突然来电话有事找他，他随叫随到，她也毫无怨言。 偶尔，双休日在家，他除了给妻儿烧菜煮饭，就是上上网，看看书，听听音乐，看看电视，再有就是种种花，养养鱼。他说其他玩的东西都不会。 有人说：如今李斌头上顶着那么多荣誉的光环，一定有压力吧！“不！”李斌说，“我没有啥压力。劳模也好，杰出人物也好……那都是党和政府根据你所做出的成绩给你的评价，我不是为劳模称号而做的，不是劳模我也这样做。要说有点什么的话，那就是责任，怎么在厂领导的领导下，把工作做得更好，包括培养好徒弟！” 是啊，他的生活似乎过得平平静静或者波澜不惊，然而，他在一线工作岗位上却做出了如此“惊人”的成绩。 那天，我离开上海液压泵厂时已经是傍晚了。不知从何处传来一首再熟悉不过的歌曲声《咱们工人有力量》。这首雄壮有力的歌我们已经传唱或听了几十年，此时再听来，一种别样的感动在心头升起。 是呀，在高科技的今天，我们工人怎么当？怎么样的工人才真正有力量？李斌，从劳动型工人到技术型工人，再到专家型工人，30年的历程不就是对知识工人最好的注释吗？他不是用自己的实践作出了回答：只有驾驭高新技术，才能真正有力量，才能实现人生的价值吗？ 没错，李斌是电气行业的一个品牌，也是一面镜子，折射出的不仅是几代工人的智慧和力量凝聚而成的勤勤恳恳、埋头苦干的无私奉献精神，更闪耀着当代工人追求知识和技能的风采，正是这种结合，使当代工人的整体素质产生了质的飞跃。 我已走出很远了，情不自禁地停下脚步，转过身，深情地凝望着上海液压泵厂高大的厂房，心中默默地向李斌致敬！向千千万万个“李斌式工人”致敬！嘴里不禁也吟唱起来：咱们工人有力量……